Here are 100 books that A Cabinetmaker's Notebook fans have personally recommended if you like
A Cabinetmaker's Notebook.
Book DNA is a community of 13,000+ authors and super readers sharing their favorite books with the world.
I have been designing and building furniture professionally since before 1976. From the beginning I’ve had an avid interest in what might be called “appropriate technologies”— when to use a hand tool or power tool — that is, for a specific use, which one gives the best results for the least time and effort? If you read the journals of 18th Century woodworkers you’ll find they were unbelievably fast —using only hand tools. I believe that by the 1970s much of that knowledge and many of the tools themselves had been lost. I set out to rediscover them.
This is on many people’s lists—and for good reason: an essential book, it will give you a solid foundation on which to build your knowledge and skill set, most specially if you are just starting out, though there is much to learn here for even the more experienced woodworker. Frid’s training contains the practical knowledge of centuries of woodworking passed through an apprenticeship system as it began its transition into the 21st Century, adapting power tools, new materials, and ways of working that will give you the information that will let you build almost anything. He wrote 2 more books in the set, also valuable, but if you can only afford one, get this one.
As a tribute to Tage Frid who passed away in 2004, combined with the 30th anniversary of The Taunton Press, this three-volume slipcase set is the most complete, authoritative guide to woodworking for readers of all skill levels. The books in the slipcase include: ""Book 1: Joinery,"" ""Book 2: Shaping, Veneering, Finishing,"" and ""Book 3: Furnituremaking,"" The techniques illustrated in these books are demonstrated step by step, with clarity and organization that allows readers to understand and carry out virtually any woodworking project. This is a limited edition.
A moving story of love, betrayal, and the enduring power of hope in the face of darkness.
German pianist Hedda Schlagel's world collapsed when her fiancé, Fritz, vanished after being sent to an enemy alien camp in the United States during the Great War. Fifteen years later, in 1932, Hedda…
I have been designing and building furniture professionally since before 1976. From the beginning I’ve had an avid interest in what might be called “appropriate technologies”— when to use a hand tool or power tool — that is, for a specific use, which one gives the best results for the least time and effort? If you read the journals of 18th Century woodworkers you’ll find they were unbelievably fast —using only hand tools. I believe that by the 1970s much of that knowledge and many of the tools themselves had been lost. I set out to rediscover them.
This is the definitive book in English on Japanese woodworking handtools. Anyone who is or contemplates using Japanese handtools — and I strongly suggest that you take a second look at them if you haven’t already as there are a number of them that are superior in their performance to their western counterparts —needs to be familiar with this book.
The classic work on the tools and spirit of the Japanese master craftsman.
In Japan, a woodworker spends years learning to use his tools with great speed and skill. Only after he has proved his mastery can he proudly call himself a shokunin, a master craftsman.
Japanese Woodworking Tools brings the traditions and training of the shokunin to the Western world. Calling on his own apprenticeship as a tategu-shi (sliding-door maker), and on 40 years of woodworking experience, Toshio Odate here offers a complete guide to Japanese tools: thin saws that cut on the pull stroke, laminated chisels with hollowed…
I have been designing and building furniture professionally since before 1976. From the beginning I’ve had an avid interest in what might be called “appropriate technologies”— when to use a hand tool or power tool — that is, for a specific use, which one gives the best results for the least time and effort? If you read the journals of 18th Century woodworkers you’ll find they were unbelievably fast —using only hand tools. I believe that by the 1970s much of that knowledge and many of the tools themselves had been lost. I set out to rediscover them.
R. A. Salaman has cataloged virtually every woodworking handtool and holding device used in the trades up into the 20th Century. What’s better is he understands the use of the tools and describes their use in practical detail with accurate drawings and text. You can find solutions to problems here that have been around for centuries but may have been overlooked by the modern woodworker. The information here will help you make and modify tools and will add to your overall understanding and use of hand tools.
Since its first publication in 1975, R.A. Salaman's Dictionary of Woodworking Tools has come to be recognized as a definitive pioneering reference work, one of unparalleled value to craftsmen, collectors, antique dealers and all who are interested in the subject of woodworking tools and their uses. His rich language describes and explains the tools, not only of the more obvious woodworking trades (such as the cabinetmaker, chairmaker, joiner, coachbuilder, cooper, shipwright, plane maker, wheelwright and instrument maker) but of the less obvious trades as well, such as broom and brush makers, tree feller, hoop maker, upholsterer, millwright, coffin maker and…
Delve into this internationally best-selling series, now complete! A fast paced laugh-out-loud mix of Urban Fantasy and Mystery.
I can tell when you’re lying. Every. Single. Time. I’m Jinx, a PI hired to find a missing university student, I hope to find her propped up at a bar–yet my gut…
I have been designing and building furniture professionally since before 1976. From the beginning I’ve had an avid interest in what might be called “appropriate technologies”— when to use a hand tool or power tool — that is, for a specific use, which one gives the best results for the least time and effort? If you read the journals of 18th Century woodworkers you’ll find they were unbelievably fast —using only hand tools. I believe that by the 1970s much of that knowledge and many of the tools themselves had been lost. I set out to rediscover them.
Franz Karg's book is a challenge: Design and build cabinets without any sheet goods—all solid wood— and make the designs exciting, the joinery accommodate stress and expansion and contraction while adding to the quality of design, or even inspiring the design. Working your way through these designs will kick your thinking and your construction approach up a notch!
A master cabinetmaker shows how to build a wide array of lasting furniture for your living room, dining room and bedroom. Sharp photographs and detailed drawings provide the technical information needed to build wall cabinets and other pieces of furniture.
Born in London, I apprenticed under cabinetmaker Hugh Harris before moving to New York to study at Juilliard. Subsequently pursuing a career as a professional musician, recording and playing with groups including Van Morrison, Razmataz, and Full Tilt Boogie, I built a house in Woodstock, NY. In addition to operating my own custom-design furniture-making shop, and lecturing and teaching extensively from coast to coast, I’ve written and illustrated many more books on woodworking. I’ve served as Contributing Editor to Fine Woodworking (1985–1999), and Popular Woodworking (1987–1996), and as Editor-in-Chief of Woodwork Magazine (1991–1994) before becoming a featured speaker and presenter at the National Woodworking Shows.
The most prolific woodworking writer of the twentieth century, Charles Hayward spans the era that started with hand tools and saw the introduction of the first electric tools thus making clear the advantages of the traditional methods. Profusely illustrated with drawings of joints, tools, and actual techniques, this is truly one of the most complete books on the basics of traditional woodworking.
This book is intended to appeal to all those who want ot know the basic essentials of wood work and of furniture making in particular. It is written by a practical cabinet maker of many years' experience and is thus on thoroughly sound, approved lines. The author starts with the elementary processes - handling tools and cutting joints, passes on to the more specialized work of drawer and door making, veneering, finishing, etc., and closes with a series of attractive designs for things to make with full working drawings and cutting lists. Apprentices, students, and the man-in-the-street should find the…
Jeff Miller is one of the country’s leading furniture designer/craftsmen. He is also a dedicated teacher and a prolific writer, with over 40 articles and 4 books (with a fifth in preparation). Jeff has exhibited furniture in shows from coast to coast, and has a piece in the permanent collection of the Chicago History Museum. Jeff’s work is heavily influenced by his former career as a professional musician, and he strives to make each of his pieces feel musical in some way.
Jeff is a runner and – despite the hindrance of living in the flat mid-west – an avid skier. A substantial chunk of his time is taken up by dialysis treatments, but he tries not to let that slow him down too much.
This is one of those books that has inspired generations of woodworkers to aim higher in their work, and to think about broad aspects of both designing for and building with wood. Krenov’s construction methods (using dowels) are idiosyncratic, but his intense approach to woodworking has had a profound impact. It is well worth a read.
James Krenov's delicate, lyrical cabinets have inspired a generation of wood craftsmen, as has his impassioned insistence that one do his very best work, no matter what. In this volume, first published in 1979, Krenov invites the reader into his workshop, where he shares his techniques and uncompromising approach to craftsmanship, along with thoughts about his work and its place in the world. Photo sequences show how Krenov composes a cabinet directly in the wood, without dimensioned drawings. He also discusses working with shop-sawn veneers, the technique of fitting curved doors, and the problems of accuracy and mistakes. The book…
On the morning of December 26, 2004, an undersea earthquake struck off the coast of Sumatra in the Indian Ocean. The resulting tsunami killed an estimated 230,000 people across fourteen countries, from Indonesia to Sri Lanka to Thailand to the Maldives to India and all the way to East Africa.…
Jeff Miller is one of the country’s leading furniture designer/craftsmen. He is also a dedicated teacher and a prolific writer, with over 40 articles and 4 books (with a fifth in preparation). Jeff has exhibited furniture in shows from coast to coast, and has a piece in the permanent collection of the Chicago History Museum. Jeff’s work is heavily influenced by his former career as a professional musician, and he strives to make each of his pieces feel musical in some way.
Jeff is a runner and – despite the hindrance of living in the flat mid-west – an avid skier. A substantial chunk of his time is taken up by dialysis treatments, but he tries not to let that slow him down too much.
This is a beautiful and thoughtful book. And much like others on this list, it offers up a personal take on woodworking. Mike feels that shop time should be devoted to engagement in the work, and offers up strategies for achieving that goal. He also offers beautiful projects, from simple to fairly advanced, that foster learning a slew of techniques for accurate work. The book also includes a discussion of design and its role for the woodworker.
The Why and How of Woodworking reflects the growing appreciation for the handmade, a movement toward simplifying and uncluttering. There is a growing understanding of the need to fill our lives with meaningful and useful objects. How can woodworkers answer that call? Instagram sensation Mike Pekovich explains how to make work that is worth the time and effort it takes to make it, work that makes a difference, and work that will add to the quality of our lives. . Explains the basics of woodworking, from choosing lumber with care, cutting joinery accurately, and preparing and finishing the surfaces. .…
Jeff Miller is one of the country’s leading furniture designer/craftsmen. He is also a dedicated teacher and a prolific writer, with over 40 articles and 4 books (with a fifth in preparation). Jeff has exhibited furniture in shows from coast to coast, and has a piece in the permanent collection of the Chicago History Museum. Jeff’s work is heavily influenced by his former career as a professional musician, and he strives to make each of his pieces feel musical in some way.
Jeff is a runner and – despite the hindrance of living in the flat mid-west – an avid skier. A substantial chunk of his time is taken up by dialysis treatments, but he tries not to let that slow him down too much.
Chris has a very personal and very persuasive approach to woodworking. In this book, he uses the discussion of a tool chest and its contents to explain his take on the basic tools needed to work with wood by hand, as well as his philosophy of working wood this way. The book is funny, compelling, and an essential read for anyone interested in hand tools and working with them.
When I am too exhausted, ill or busy to work in my shop, I will shuffle down the stairs to my 15' x 25' workshop and simply stand there for a few minutes with my hands on my tools. To be sure, I thought I was a touch nuts because of this personality quirk. But after reading the oral histories and diaries of craftsmen from the last 300 years, I found it's actually a common trait among artisans. I am drawn, married or perhaps addicted to the things that allow me to coax wood into new shapes. At the same…
As the authors of 27 hand-illustrated books, we are acutely aware of the time and skill required for good rendering. We are old-schoolers ourselves, having cut our teeth on “how-to” books before computers came into vogue. Our readers often tell us that a computer drawing does not have the same appeal and clarity as hand drawing. We are able to ‘talk’ a reader through the process of building something with our drawings. We have also found that the best illustrated books often have the best content!
Watson is both a talented artist and woodworker. He combines those skills in a number of books, but our favorite is Hand Tools. Everyone needs at least some hand tools in their shop, and they should know how to use them properly. Watson’s book contains 450 beautiful hand-drawn illustrations, in pencil, that beg to be framed and hung on the wall. The writing is close behind.
For those who would like to have the benefit of a woodworker's extensive experience with hand tools, this is the book to own. Crammed with practical information, it is the next best thing to looking over a craftsman's shoulder as he works with his tools, asking questions and getting straight answers in plain language, seeing how each tool is held and manipulated to get the best work out of it. From bit brace, chisel, and mallet to saws, specialized planes, drawknife, and spokeshave, Aldren Watson describes in detail the actions of the tools basic to good woodworking. All the procedures…
Nelson West, a former Chicago homicide detective, is hired by wealthy heir Lionel Bing to discreetly help “fix” scandals and legal problems for his father’s wealthy friends.
Bing, a brilliant but troubled investigator, suffers from PTSD symptoms as a result of being kidnapped and witnessing the murder of his mother…
Born in London, I apprenticed under cabinetmaker Hugh Harris before moving to New York to study at Juilliard. Subsequently pursuing a career as a professional musician, recording and playing with groups including Van Morrison, Razmataz, and Full Tilt Boogie, I built a house in Woodstock, NY. In addition to operating my own custom-design furniture-making shop, and lecturing and teaching extensively from coast to coast, I’ve written and illustrated many more books on woodworking. I’ve served as Contributing Editor to Fine Woodworking (1985–1999), and Popular Woodworking (1987–1996), and as Editor-in-Chief of Woodwork Magazine (1991–1994) before becoming a featured speaker and presenter at the National Woodworking Shows.
Photographs and detailed line drawings cover virtually the entire history of European furniture construction. Not merely a catalogue this book goes into minute detail about construction of the finest furniture that was ever made by hand from clockcases to bedsteads. It explains stylistic details as well as actual methods.
Many of the earliest books, particularly those dating back to the 1900s and before, are now extremely scarce and increasingly expensive. We are republishing these classic works in affordable, high quality, modern editions, using the original text and artwork.
